Pre-loader
Hot
New
-15%
In stock
Pre-order
Out stock

PEKK-A-GF20

AED. 1,290.00AED. 1,100.00

You Save: AED. 190.00 (15%)

SKU: PEKK-A-GF20-500

VENDOR: 3damss

PEKK-A-GF20 (PolyEtherKetoneKetone) is made possible using PEKK (60/40 copolymer) and glass fibers.Ā  This combination makes for one of the highest-performance polymer compounds in the world. A leading material in the PAEK family, PEKK has exceptionally good mechanical, thermal, and chemical resistance properties. It is also not only substantiall...

250 GMS
500 GMS
1KG
NATURAL
Description
Questions & Support
Customer Reviews
Description

PEKK-A-GF20 (PolyEtherKetoneKetone) is made possible using PEKK (60/40 copolymer) and glass fibers.Ā  This combination makes for one of the highest-performance polymer compounds in the world. A leading material in the PAEK family, PEKK has exceptionally good mechanical, thermal, and chemical resistance properties. It is also not only substantially easier to print than PEEK. PEKK products have a lower melt temperature as well as a lower rate and degree of crystallinity than PEEK, which aids in the remarkable ease of printing.

Benefits of PEKK-A-GF20 Ā Includes:
Ā Ā Ā  ā€¢ Substantially easier to 3D print than PEEK
Ā Ā Ā  ā€¢ Wide processing window from 345-375Ā°C
Ā Ā Ā  ā€¢ Tg of 160Ā°C, HDT of 150Ā°C, and a Tm of 305Ā°C
Ā Ā Ā  ā€¢ Inherently flame resistant (UL94 V-0)
Ā Ā Ā  ā€¢ Low smoke generation
Ā Ā Ā  ā€¢ Outstanding mechanical, thermal, and chemical resistances
Ā Ā Ā  ā€¢ CUT of 250C if Annealed to the crystalline state

Typical PEKK-A-GF20 Applications Include:
Ā Ā Ā  ā€¢ Seals, Gears, Bushings, Bearings, Pump, and Compressor Components
Ā Ā Ā  ā€¢ Industries Served: Auto, Aerospace, Defense, Semi-conductor, Oil & Gas

Filament Specifications:
Ā Ā Ā  ā€¢ 1.75mm +/- 0.05mm in diameter

Ā 

Recommended Print Settings:
Ā Ā Ā  ā€¢ Extruder Temps: Ā 345 ā€“ 375Ā°C
Ā Ā Ā  ā€¢ Bed Temps: Ā 125 ā€“ 140Ā°C
Ā Ā Ā  ā€¢ Bed Prep: Ā Rough Borosilicate Glass with PVP gluestick, or High temp carbon fiber sheet plus PVP glue stick, we also recommend the Vision Miner Nano Polymer
Ā Ā Ā  ā€¢ Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our Carbide nozzles
Ā Ā Ā  ā€¢ Layer Height:Ā  Ideal layer height is 60% of nozzle diameter.Ā  We do not recommend printing layers below 0.25mm with Glass fiber grades.Ā  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
Ā Ā Ā  ā€¢ Flow should be set to 102-105% depending on the feeder for a complete filling of the material.
Ā Ā Ā  ā€¢ Drying Instructions:Ā  Ā Please dry @110-120Ā°C for 12-24 hours, for the first dry its recommended to dry for at least 24 hours before using, the drying time can be lowered using a vacuum oven and also storing the filament in a degassing chamber when not in use.
Ā Ā Ā  ā€¢ Enclosure temp (if your printer is equipped):Ā  70 ā€“ 140Ā°C [hotter is better, up to 140Ā°C]

Additional information
Weight: N/A
Dimensions: N/A
Brand: 3DAMSS
Choose Weight: 100g (.22lbs), 250g (.55 lbs), 500g (1.1 lbs), 1kg (2.2 lbs)
Choose Diameter: 1.75mm

Questions & Support
Customer Reviews

This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.

PEKK-A-GF20

PEKK-A-GF20

AED. 1,290.00AED. 1,100.00
250 GMS
500 GMS
1KG
NATURAL
Pre-loader